Why do outdoor sports enthusiasts prefer LED emergency flashlight?

In the outdoor lighting supplies, LED flashlight by more and more people is concerned. Along with the introduction of new higher brightness LED, LED flashlight has also been diversified development. LED emergency flashlight in domestic brands, Knight Cole (NITECORE) is more concerned by the users of the brand; its multi- series of LED flashlight also provides users with a variety of options.

Knight Cole in many products, the generic series of LED flashlight has better applicability due, therefore received more attention. It is especially versatile range of products, in terms of volume and general acceptance by the users.

This flashlight uses a Cree (CREE) XM-L (U2) LED, up to 800 lumens of light output. This flashlight is Nate Cole family an almighty series, so positioning is also more comprehensive; in Knight Cole LED emergency flashlight has an important position.

After unpacking, we have this first impression is the flashlight head. While there are products on the product packaging physical map, but still use it MT26 bulk flashlight left us a deep impression. MT26 head diameter up to 34mm, while the body diameter is only 26mm, and the common portable flashlight compared to the large number 18650.

Can then be found in his hand, MT26 flashlight weight is enough, the battery is not installed reached 133 g, occupy the most prominent in the head weight. The surface using a flashlight Army regulations three hard anodizing (HAIII) technology enhanced abrasion resistance flashlight, Flashlight oxidation entire surface evenly, feel is good.

This flashlight uses a head attack head design, there are three prominent design, you can use in case of emergency. MT26 flashlight head cooling fins is also designed to enhance the cooling effect, the cooling fins are recessed can play an anti-roll effect, but in actual use in very satisfactory results. Also need tactical anti-roll ring and holding clip to complete.

Flashlight still has a common cylinder head and tail three- barrel design, springs and threaded detail is very good. It is worth mentioning that the barrel portion of the cylinder head and connected to the conductive threads and the end use of the conductive means used simultaneously, corresponding to two different lighting modes: the use of conductive threads custom mode, the use of extremely bright face the conductive pattern. Barrel and tail end connected by a conductive thread used here is a triangular thread.

MT26 tail using a U-shaped groove design, you can easily use the hand rope, but the prominent part of the narrow tail, with the head of the volume and quality are very large, so the center of gravity is high and unstable inverted, slight shaking fall also cause flashlight, flashlight can see that this is not suitable for inverted use.