Thursday, November 28, 2013

Home LED lighting penetration rate expected to reach 30% in Japan

Japan is already the world's leading country with the lowest power consumption of American families are two -fold evenly Japanese family, instrumentation four times, but was not satisfied with this meaning in Japan, the Japanese in the future to produce at low cost many areas of the world to compete with developing countries, can be said to have no chance of winning, so the development of the " environment" related industries, is consistent with the direction of Japanese entrepreneurs.

Japan's economy based on industrial province intend, look forward to in 2030, so that LED / OLED bulb replacement for at least 60% of the incandescent light bulb, of course, the most important family is still occupied by fluorescent lighting high luminous efficacy and a better economic advantage, However fluorescent grow skills have peaked, while the luminous efficiency of LED / OLED is still the continuous growth of output, but down 90 % of the cost of each track for 10 years, at least a measure of this trend can be continuously 2016, therefore, the future luminous efficacy home LED lighting according to the source, is expected to continuously increase ( and thus its utilization will be broader and more power), but the price will be reduced to an appropriate stage.

Japan and the United States, Europe and other LED light source manufacturer believes that the current luminous efficiency of individual commercial home LED lighting, although only 80 lumens / watt, but 3 or 4 years 120 to 150 lumens / watt high-efficiency LED lights will be commercialized, then the entire application life products the total cost of the application cycle (light bulbs expense plus electricity) will be lower than the energy saving LED light bulbs. LED lamp manufacturers to guess the future to reach 200 to 300 lm / W in 2020 will be able to match the goal.

Japan's machinery industry based on a combination would guess, when in 2030, LED / Ohome LED lighting indoor lighting penetration rate in Japan will reach 30%, representing 20% of total electricity for lighting, in terms of energy saving and carbon reduction benefits, will be thrifty 18.7 billion kwh of electricity for the year, or 7 million tons of carbon dioxide emissions.

Home LED lighting optimistic vision, however, can not neglect the development of another new generation of lighting technology, discrete components that Ohome LED lighting, OLED organic light-emitting diode that is seen as the next generation continuation display technology.

Wednesday, November 27, 2013

Put this slim rechargeable torch lighting into your purse

Recently, an American company to launch a credit card sized Orange Slice thin torch lighting White Slice. The LED product with a credit card the same shape, the thickness of the product model is about 0.10 inches, the thickness of the finished product is not expected to produce more than 0.105 inches.

Portable Search Explosion-proof Light (BX0507B-L), Anti-Explosion LED FlashlightIn general, the thickness of a credit card is about 0.05 inches, so the White Slice thickness equivalent to only two credit cards. It uses high power density lithium polymer batteries, integrated circuits and 10 high-output LED. According to the specifications of torch lighting, White Slice luminous flux is of up to 15 lumens, 30 lumens and 45 lumens.

White Slice LED driver circuitry automatically adjusts the voltage to extend battery life and keep the brightness. When the battery is low, LED will start flashing to alert the user to charge again. Previously there have been the easiest card light switch is faulty. White Slice uses two switches, just in case. Further, in the production process, the printed circuit board is immersed in the liquid gold, so that the switch is gilded. Gold has a strong resistance to corrosion, so you can be assured White Slice switch.

In addition, based on the White Slice, Orange Slice Company has designed the Green Slice. Compared with White Slice, Green Slice thinner, LED halve the number ( 5 ), and therefore the brightness by half, working hours extended twice. On the choice of shell material, Orange Slice also different attempts, there is used a light -weight carbon fibers, but also has great rigidity easily processed using a polyacetal copolymer.

Torch lighting can use high-quality NiMH or NiCd batteries recommended genuine GP, gen, etc. This section uses energy-efficient LED bulbs, low power consumption, the use of more environmentally friendly rechargeable batteries. Charging the battery voltage is 1.2V alkaline batteries 1.5V, high-quality rechargeable battery internal resistance lower than alkaline batteries can provide enough power for passing current, please be assured of high quality genuine nickel-metal hydride rechargeable batteries.

Tuesday, November 26, 2013

North Korea Lighting Exhibition attracts numerous visitors

Korea National Exhibition lighting and can light fixture equipment and technology will be published on the 19th to the 20th at the industrial complex at the University Kinzer, on display at the various power LED lights and large LED screens and other exhibits pocketed the participant 's eye.

According to the Korean Central News Agency reported that the DPRK National Exhibition can light fixture and lighting equipment and technology will be published on the 19th to the 20th at the industrial complex at the University Kinzer, on display at the various power LED lights and large LED screens and other exhibits pocketed the participants the eyeball.

Reported that the can light fixture engineering sector production units, scientific and educational institutions and technology workers, teachers, etc. come to the meeting. Kim Il Sung University, Kinzer industrial university, lighting Pyongyang launched more than 110 kinds of plants and other units of more than 400 pieces of LED lamps and other lighting sources and stabilizer, published dozens of papers.

Participants exchanged for the realization of can light fixture equipment and modernization of production technology and scientific, to make the city beautiful night, monumental buildings and people's cultural entertainment lighting technology problem solving achievements and experience.

The report also said the DPRK National Academy of Sciences Institute of Power Machinery, three thousand lighting fixtures factory, Taedong River Technology Agency focus type exhibited efficient LED flood light illumination, a variety of power LED lights and large LED screens and other exhibits pocketed the participants the eyeball.

From indoor to outdoor, and more to adorn the surroundings, modern lighting fixtures design style more diverse, classical, modern, stylish, Continental, American, fresh, luxurious, beautiful. This requires indoor lighting companies have sufficient foresight and innovation, according to the changing needs of consumers to design consumer satisfaction. Lighting not only played household lighting effects, different styles can be embellished different effects.

Spot lighting to create an atmosphere of space. Generally, we can be a ceiling as the main light source, set the lamp, or LED lights trough small spotlights, downlights and other decorative or as a focus of the lighting, to reduce indoor light and dark contrast. If we have the habit of reading in bed, it is recommended to put a dimmable bedside directly shaped lamp, energy-saving lamps installed halogen lamp or cold, to avoid eyestrain.

Monday, November 25, 2013

Philips introduces a new generation of compact spiral energy saving bulbs

The emergence of the Apple iPod allows music to bring more fashionable colors. Now, Philips unique aesthetic lines of the new spiral energy saving bulbs in the international design world gained high recognition for your life and add a sense of fashion.

Following the October 1, 2013, the world's authoritative industrial design in Japan Industrial Design Promotion Organization (JIDPO) Philips Mini Spiral CFL issued after the G-Mark Design Award; recently, the family obtained a 2013China'sMostSuccessfulDesignsAward.

Now, more and more families choose energy-saving lamps for illumination of choice. Following the Philips Mini Spiral CFL successful listing, Philips has launched a compact spiral energy saving bulb, the product brings more space curve modeling beauty, but also the continuation of the mini spiral energy saving light " small size " advantage; not only cold, warm colors optional, and there are 15 W / 20 W / 24 W 3 sizes to choose from. In the case to achieve the same brightness, compact spiral energy saving bulb can reach the equivalent 75 W / 100 W / 120 watt ordinary incandescent lighting effects. Thus, the use of compact spiral energy saving lamp can save 4 /5 of the electricity.

In addition to the home environment, offices, shopping malls and other public places are to play a delicate spiral CFL expertise places. And smaller, more refined, faster startup; it appears, lets hope the "energy" and "beautiful" consumers have been satisfied with the new choice.

Compact Spiral energy saving lamps have long life of 6000 hours; using unique rare earth dichromatic phosphor technology in use after 2000 hours and still be able to maintain just 85% of the brightness when used; compared with the same wattage energy saving U-tube brightness increased by 10%; higher color, light color pleasing to the eye and comfortable. This means that a clearer and enjoyable to read and carry out other activities.

With compact small size Spiral energy saving bulbs will replace incandescent, not only to meet the needs of decoration, but also to save about 80 % of the lighting power consumption and effective way. It will also be home to promote or business owners improve lighting quality, save electricity costs, cost-effective choice.

Spiral appearance attractive enough; actual performance of the electricity savings; Philips compact spiral energy saving lamp energy saving lamp will declare the "bright" era.

Wednesday, November 20, 2013

PwC plans to invest $ 1 billion to aquire management consulting company Booz

One of the big four accounting firm Deloitte & Touche (Deloitte) acquired bankruptcy protection management consulting firm Monitor (Monitor), the other one of the four members of the PricewaterhouseCoopers (PwC) has also launched M & Management Consulting the pace of business.

Yesterday, PricewaterhouseCoopers and Booz & Company (Booz & Company) jointly announced that they have signed a conditional agreement to merge. The transaction is subject to the consent of Booz & Company partner, regulatory approvals and other customary closing conditions fulfilled. Although no formal merger transaction prices disclosed, but there are foreign media speculation that the transaction amount may be $ 1 billion. Read more news on management consulting.

Booz & Company CEO Mathis (Cesare R. Mainardi) publicly stated: "Our goal is to help customers discover and build their winning capabilities needed to differentiate the two sides could not just make this innovative combined value proposition be achieved, also in the next one century remodeling the management consulting industry. "

PricewaterhouseCoopers International Limited, Global Chairman Dai Ruili (Dennis Nally), said: "We believe that the existing audit, consulting and tax services possible merger with Booz & Company, will create an outstanding professional services organization serving more provide first-class customer service. "

Booz & Company 's 300 man- year partnership agreement in December of the vote, and in the end publicly further instructions. Under the merger agreement the contents of the merged PricewaterhouseCoopers after Bos will give up their name, the name of the PwC commenced business operations.

Founded in 1914, Booz & Company, in 2013 VAULT management consulting company ranked fourth on the list, which earlier this year acquired the headquarters in Dusseldorf, Germany, a global consulting firm - out of a corporate management consulting company. At that time, its Greater China president Bai Xinhui (Sarah Butler) once told reporters: "The Company and the company to expand capacity expansion needs, the management consulting industry in recent years, mergers and acquisitions wave erection of two reasons."

"The whole industry is in the integration process." An international consulting industry veteran Jiang Bo ( a pseudonym ) told reporters that the first echelon of the international management consulting industry is MBB ( McKinsey, Boston, Bain ), the second tier is Kearney, Boss, Roland Berger, but medium-sized management consulting firm will be more volatile performance pressure, because the scale is not enough, the business of a single species management consulting company for the maintenance of a customer's cost more.

Tuesday, November 19, 2013

Everlight launches new series of blue LED light strips

Global leader in LED packaging manufacturer Everlight August 26 announced, with 30 years of professional experience in research and development of LED assembly, continued to expand 3020 package size products, the introduction of new low-power 45-21S 0.2W lighting components. This new component can be widely used in all kinds of general lighting; especially blue LED light strip light products can be more cost effective.

Everlight 45-21S Standard 3020 is an upgraded version of package size, because of the special package designs, to have the best cooling effect, 60mA current drive, the luminous efficiency can reach 115lm / W ( cool white ) and 104lm / W ( warm white ). 45-21S features a combination of these products, is one hundred million light most cost-effective products that provides general lighting best solution for playing pieces of plans to reduce the number of LED application products is very suitable, such as blue LED light strips, panel lights, etc.

Traditional lights are used 20mA PLCC package products, it must by many LED quantity, densely arranged regularly, such as fluorescent tubes only show like glow. Therefore, the recent market trends show, the blue LED light strip ( article ) manufacturers want to reduce overall manufacturing costs, but to play in reducing the number of parts LED premise, but also to maintain the original, or even higher brightness. 45-21S Everlight to meet user expectations are, without changes in the design of the circuit and the PCB board, an increase in the brightness of the original PLCC package, the original can be large current drive LED package, the LED simultaneously reduced the number of playing pieces, and the Lamp (Article) drivers will be more cost-effective.

Everlight 45-21S Series ANSI color temperature from 2700K to 6500K, CRI > 80, at 60mA current, standard output flux 20lm ( warm white ) and 22lm ( cold white ); at 75mA current, the value of 24 lumens -26lm. 45-21S as a lead-free process and RoHS environmental standards, and have passed the LM80 testing.

Monday, November 18, 2013

Philips introduces high performance DC lamp Lumileds

Recently, Philips Lumileds' LUXEON Rebel LED UL approved to become the first high-performance DC lamp. Now, through the use of LUXEON Rebel LED, the new products are expected to solid state lighting applications faster and more easily selected Underwriters Laboratories (UL) certification directory.

UL certified lighting products in the United States de facto mandatory, because the major agencies are required to pass this certification, including municipal authorities, government agencies, architects and insurance companies. This certification can make use of LUXEON Rebel without making a new DC lamp assembly through a comprehensive internal investigation can be UL Listed, thus speeding up the speed to market. As lamps must be UL Listed to be eligible to use ENERGY STAR label, which will also contribute through this certification ENERGY STAR certification.

In addition, to obtain UL certification can promote the use of a class of power, thereby helping to improve street lighting and other LED applications, the performance of LUXEON Rebel lens cover meet UL standards for electrical requirements, as before without UL through comprehensive research; past full requirements have hampered research on more efficient use of class 1 power supply.

Philips Lumileds' Application director Rudi Hechfellner said, "the majority of products sold in the U.S. state lighting manufacturers are asked to join the UL certification catalog, but until now, the certification process is very confusing. By using LUXEON Rebel, engineers can according to the UL clear guidance work, shorten UL review cycle, avoiding the luminaries certification process unexpected problems that may arise. "

Sunday, November 17, 2013

Bluetooth speakers can be a perfect Christmas gift

Today's smart phones are already a handheld computer. Take watching movies and listening to music can be said to be, when we facing a large screen mobile phone to watch movies or listen to music, there is always an indescribable depression.

Many people will feel mobile sound enough to force, if there is loud and clear detailed sound, it must considerably. Bluetooth speakers will be able to lift this repression. Bluetooth wireless technology, fast and convenient connections smartphone or tablet. Pick up bluetooth speaker on okbuynow for Christmas gift.

Bluetooth speakers are better able to carry on with the portable intelligent terminal equipment connection, so portable applications designed for outdoor products are very popular. With integrated structural design, small size, and the design of hand-carry, outdoor full range of children.

In fact, from the volume portable positioning point of view, be placed in the living room environment is also suitable for use, so the overall appearance is very focused sense of design, while requiring fashion sense. Has a red, white and black version, there is no problem with the home environment.

In general, the process of connecting Bluetooth speakers are relatively complicated, but simplify this process, the key aspect is the control number, try to simplify operation. Case is designed with three buttons at the top of the front, adjust the volume, respectively, and Bluetooth / mute button, the button beneath the lights, the control panel is very simple.

It feature wireless Bluetooth connection and support those product that have Bluetooth functions, such as, mobile, Tablet PC, and laptop. It's also support Line in audio input. Hands-free multifunction speaker is specially design for safety driving. With voice prompt function and it can mostly connect with two phones at the same time. Fashionable and transparent shell, smooth touch, small and convenient to carry, multifunction integrated design, it provides you with premium perfect sound quality. You can enjoy the excellent sound quality while at home, traveling or in business work.

Thursday, November 14, 2013

2014 U.S. Fluorescent Lighting Fair

Time: April 23 - 25, 2014
Hall: Las Vegas
Address: Las Vegas, USA
Organizer: Illuminating Engineering Society of North America and the International Association of Lighting Design

Info:
2014 American International Lighting Fair, is North America's most important about the architectural and commercial lighting exhibition event. The exhibition by the Illuminating Engineering Society of North America and the International Association of Lighting Design, has been successfully held 21 sessions in New York and Las Vegas organized tour, since 2012 New York Jacob K. Javits Exhibition Centre Extension, so the exhibition moves to Philadelphia, Pennsylvania Convention Center. 2010 The exhibition in Las Vegas Exhibition Centre, the exhibition area of 14,000 square meters, attracted participants from all over the world more than 470 exhibitors, exhibition covers more than 1,500 fluorescent light tube products, up to more than 19,000 professional visitors people are from international and U.S. domestic architecture, lighting, engineering, various other aspects of the design unit 's top professionals. Many well-known companies are exhibiting year after year, and in the exhibition occupies a significant position.

It is held in conjunction with LIGHTFAIR INTERNATIONAL along with the world's largest architectural and commercial fluorescent light tube to the theme of a seminar for international lighting manufacturers to provide a showcase of new products, raise awareness, promote new technologies and services, demonstration and application software, and effective solution technical problems a great place; also for exhibitors and merchants to provide opportunities for interaction between, so that we experience the new products, new designs, new technologies and services to new ideas, but also makes the exhibitors can be kept informed of today's lighting industry trends.

Exhibits:
Ballasts, drivers, converters; coating, polishing and related materials; daylight fluorescent light tube products; design and analysis software; optical and remote lighting, fluorescent light tube, incandescent, landscape lights, bollard lights and fountain lights; Downlights, wall lighting fixtures, motion lights; open light, sensors, controllers and control software; industrial Lighting; rail lighting, low voltage cables, reflective concave groove, surface fixtures; architectural lighting integrated systems, lighting components, decorative candlesticks, chandeliers and pendants; lamps and work lights; entrance cue lights and emergency lights; outdoor lamps, HID lamps; lamp; LED lights; special lighting and equipment, stage lights and entertainment, publishing and related industry publications, anti-breaking and industrial special lights.

Wednesday, November 13, 2013

USDA: Australia's 2013/14 wheat production is down to 23.5 million tons

USDA: Australia's 2013/14 wheat production is down to 23.5 million tons

According to the U.S. Department of Agriculture Foreign Agricultural Service Center released the latest Counselor report shows that 2013/14 ( October to September ) Australian wheat production may be 23.5 million tons, down from an earlier forecast of 24.5 million tons, higher than the 2012 / 13 year 's 22.1 million tons.

Counsellor expected 2013/14 Australian wheat export volume of 18 million tons, compared with an earlier forecast of 18.5 million tons last year to 19.5 million tons. Where food, seed and industrial use is projected at 300 million tons, the earlier forecast of 3.3 million tons, last year 320 million tons.

Counsellor expected 2013/14 Australian wheat ending stocks at 280 million tons, compared with an earlier forecast of 300 million tons last year to 3.2 million tons.

According to the U.S. Department of Agriculture Foreign Agricultural Service Center released the latest Counselor report shows that 2013/ 14 year (November to October) Australian barley production forecast unchanged at 7.2 million tons. By contrast, last year's actual production of 670 million tons.

Counsellor expected 2013/14 Australian barley exports to 400 million tones, consistent with earlier forecasts; last year was 380 million tons.

2013/14 ending stocks of barley in Australia is estimated at 369,000 tons, down from an earlier forecast of 410,000 tons, last year was 21.9 million tons.

Senator Richard Colbeck has announced that Australia's aquaculture industry has been significantly increased and now accounts for almost half of the countrys fish production. Australian Bureau of Agricultural Resource Economics and Science of the Australian Fisheries Statistics 2012 annual report shows that in the past decade aquaculture fishery products in Australia, the share of revenue from 30% to 46%.

"Most of the growth can be attributed to the rapid growth of the fish farming industry in 2011-2012, the production of farmed salmon to become the largest groups of species, its revenue grew 20 percent and it is still Australia's highest yielding fishery products, worth $ 513 million, " Mr baker, Cole said.


Colbeck Members said the report shows that Australias total fisheries production value growth of 3 percent to $ 2.3 billion. Australia's domestic seafood consumption in the past 30 years has been on the rise, Australians eat 25 kilograms per person per year seafood, higher than the world average.

Tuesday, November 12, 2013

TE Connectivity introduced several new bulb base for a wide range of LED series

Darmstadt, Germany, December 14, 2012 - TE Connectivity (TE), as a global technology leader, today announced the launch of a series of innovative and scalable solderless LED series bulb bases, to meet the most common LED series connectivity requirements.

TE solderless LED lamp with a small, thin, and flexibility characteristics for the onboard chip series LED offers convenient solderless connections. Both low cost and simple design provides reliable power required LED connections, mechanical attachment and reliable heat retention. TE bulb base weld solve many of the problems, the use of standard screws can be directly connected to the LED heat sink, this design is more reliable, easier to use, and accelerate speed to market. TE holder Easy installation saves time; improve the reliability and quality, while greatly reducing the product installation time.

TE Intelligent Buildings Division, Global Product Manager Bart Broeren said: "The current market demand for on-board chip LED growing increasingly rich product selection. TE lamp will continue to expand the scope of application solutions for the specific needs of customers on the LED, provide a more intelligent, better and more convenient products. Scalable design bulb bases focus on the future, through these flexible, scalable bulb base sets, allows current and future advanced LED products to get faster application. "

TE lamp is not only easy to use, while the design of robust, reliable and feature-rich. Currently, TE has announced the availability of 24 different models LED lamp series, including the highly flexible modular rectangular connectors and fit easily assembled sections of monolithic LED size configuration preloaded connector. At the same time, customers can choose additional spring metal temperature; increase the filling pressure of the heat sink, the thermal interface material is not subject to a variety of ceramic substrate damage, but the design of the molded case to reduce the obstruction of the LED light output. TE characteristics having a high reflectance, and rounded white lighting materials can be avoided to the maximum extent the generation of shadows. Optical isolation zone is secondary optics provides a clear projection area.

TE Connectivity is a global company with annual sales of $ 13 billion. Company designs and manufactures approximately 500,000 kinds of products that connect and protect the various products we use every day in the power and data flow. From consumer electronics, energy and healthcare, to automotive, aerospace and communication networks, we use smarter, faster, and more sophisticated technology, giving the product more likely.

Monday, November 11, 2013

U.S. Green home products consumer research report has been released

Some time ago the U.S. Commission on Sustainable Development home products (Sustainable Furnishings Council, SFC) green household products consumer research report has been issued. 460 consumers participated in the survey, 72.5 percent of respondents were 25-54 years old, 62.3% of respondents annual household income of $ 50,000 to $ 150,000.

Like last year, about 50% of consumers have pointed out that if the style and price and other similar home products, they are "very interested" in buying green furniture. A large part of the consumer is still very concerned about sustainable development, but that furniture retailers and manufacturers need to let consumers know the benefits of sustainable household home products. Here are more home products for your reference.

This requires retailers and manufacturers of furniture first own green furniture have a deep understanding and knowledge of green furniture materials on the environment what positive meaning, then these ideas home to the consumer advocacy.

54.3% of respondents said they plan to spend the same amount in 2014, or more money to buy furnishings. As can be seen in 2014, the furniture in the United States is still a great market, but consumers are very concerned about green furniture. Now American green furniture market is not the consumer's problem, but is the manufacturer's problem.

Furniture exports now account for a pivotal position in the furniture industry, the furniture industry exports accounted for 1/ 3. In the exporting country, the United States is the largest furniture export market. While this year's furniture exports year on year decline in the United States, and in effect from July 1 this year, the United States began to implement the " Formaldehyde Standards for Composite Wood Products Act" in the United States once again reduced sales and wholesale wood home products formaldehyde emission, than the original request improved by 3 to 4 times. Furniture exports to the U.S. caused a greater impact. But their counterparts in furniture manufacturing, we should also see green furniture opportunity to develop green furniture; while increasing their level of technology, so that products can meet the standards.

Sunday, November 10, 2013

Why do outdoor sports enthusiasts prefer LED emergency flashlight?

In the outdoor lighting supplies, LED flashlight by more and more people is concerned. Along with the introduction of new higher brightness LED, LED flashlight has also been diversified development. LED emergency flashlight in domestic brands, Knight Cole (NITECORE) is more concerned by the users of the brand; its multi- series of LED flashlight also provides users with a variety of options.

Knight Cole in many products, the generic series of LED flashlight has better applicability due, therefore received more attention. It is especially versatile range of products, in terms of volume and general acceptance by the users.

This flashlight uses a Cree (CREE) XM-L (U2) LED, up to 800 lumens of light output. This flashlight is Nate Cole family an almighty series, so positioning is also more comprehensive; in Knight Cole LED emergency flashlight has an important position.

After unpacking, we have this first impression is the flashlight head. While there are products on the product packaging physical map, but still use it MT26 bulk flashlight left us a deep impression. MT26 head diameter up to 34mm, while the body diameter is only 26mm, and the common portable flashlight compared to the large number 18650.

Can then be found in his hand, MT26 flashlight weight is enough, the battery is not installed reached 133 g, occupy the most prominent in the head weight. The surface using a flashlight Army regulations three hard anodizing (HAIII) technology enhanced abrasion resistance flashlight, Flashlight oxidation entire surface evenly, feel is good.

This flashlight uses a head attack head design, there are three prominent design, you can use in case of emergency. MT26 flashlight head cooling fins is also designed to enhance the cooling effect, the cooling fins are recessed can play an anti-roll effect, but in actual use in very satisfactory results. Also need tactical anti-roll ring and holding clip to complete.

Flashlight still has a common cylinder head and tail three- barrel design, springs and threaded detail is very good. It is worth mentioning that the barrel portion of the cylinder head and connected to the conductive threads and the end use of the conductive means used simultaneously, corresponding to two different lighting modes: the use of conductive threads custom mode, the use of extremely bright face the conductive pattern. Barrel and tail end connected by a conductive thread used here is a triangular thread.

MT26 tail using a U-shaped groove design, you can easily use the hand rope, but the prominent part of the narrow tail, with the head of the volume and quality are very large, so the center of gravity is high and unstable inverted, slight shaking fall also cause flashlight, flashlight can see that this is not suitable for inverted use.

Wednesday, November 6, 2013

Vishay's new white SMD LED features the thickness of only 0.9mm

Recently, Vishay Intertechnology Introduces using indium gallium nitride (InGan) technology, with low resistance and high optical power characteristics of the new warm white SMD LED  VLMW611 and VLMW621 series.

The VLMW611 series uses CLCC-6 package, while VLMW621 Series uses the industry with 0.9mm ultra-thin thickness of CLCC-6 flat package.

The new white SMD LED with 1,800 mcd ~ 7,100 mcd light intensity range, and 40K / W and 50K / W low thermal resistance, specifically for the automotive and transport, consumer, and general applications backlighting and illumination were optimized. Major applications include handheld mobile terminals, such as mobile phone and PDA, etc.; also suitable for instrument panel; marker lamps; advertising display, as well as refrigerators, washing machines and dryers and other appliances and bike lights and other applications.

All of these components are with 140mA Forward Current, 4.3V maximum forward voltage and 650mW power consumption. These components provide 24lm / W light efficiency and compliance with JESD22-A114-B specification of the highest 1kV ESD withstand voltage.

The new white SMD LED has a 60 ° angle of half intensity with IR reflow process compatible and comply with CECC 00802 and J-STD-020C standard. These components have passed the AEC-Q101 automotive standard certification and comply with RoHS 2002/95/EC and WEEE 2002/96/EC specifications. According to JEDEC Level 4 standard pretreatment CLCC-6 and CLCC-6 flat package is lead (Pb), and comply with RoHS.

In the market, require a reliable product with a high light efficiency, the components of the ceramic package so that they require careful thermal management applications ideal source. Their low thermal resistance allows these components to achieve maximum light output as the additional current drive, while keeping up to 50,000 hours of life.

Tuesday, November 5, 2013

U.S. medical building AIA Design Award 2013 has been announced

Building Name: UCLA, outpatient surgical oncology centers
Project Address: California, United States
Architectural Design: Michael W. Folonis Architects

This building in addition to providing a centralized treatment of patients with medical function, but also implemented it as an architectural aesthetic value. This building is the only one to win the AIA-AAH list Category Award Award and construction double prizes. Please feel free to read more news on building design.

Building Name: Peace Island Medical Center
Project Address: Washington, United States
Architectural Design: Mahlum

The building reflects the nursing staff and the entire community values: humility, environment-friendly, as well as innovation. The whole building has implemented the idea of sustainable development, such a system, in large savings in water and energy use.

Building Name: Everett Medical Center Outpatient smoked points
Project Address: Washington, United States
Architectural Design: ZGF Architects LLP

This project from start to finish a share of 275 days. The construction of this building requires coordination of multiple stakeholders, including Atlanta and Fulton County Government, the insurance company Whiting-Turner, Fulton County Board of Supervisors Vice Chairman Emma Darnell, Fulton County Cultural Affairs Office, Medical Center employees and West Side neighborhood residents.

Building Name: University of Minnesota Children's Hospital
Project Address: Minneapolis, Minnesota
Architectural Design: Tsoi / Kobus & Associates

The building for the hospital to create a unique identity, appearance of a bright and colorful live wave stainless steel plate, an interactive interior design theme: "Discovery World entrance." Found in AIDS patients in the region, the ability to detect and transferred for treatment.

Building Name: Palomar Medical Center
Project Address: Escondido California USA
Architectural Design: CO Architects

This medical center, an innovative concept of sustainable development and is nationally recognized. The hospital has 360 beds, an acute care hospital located in the center.

Building Name: San Antonio Military Medical Center (affiliated to Brooke Army Medical Center)
Project Address: Houston, TX
Architectural Design: RTKL Associates, Inc.

San Antonio Military Medical Center is the largest inpatient medical center. Also the U.S. National Security Agency certification bodies burn centers. Officially opened in 2011, the addition of 102 beds, a rehabilitation clinic, an expanded operating rooms, a new emergency departments.

Building Name: Sheikh Khalifa Medical City
Project Address: Abu Dhabi, United Arab Emirates
Architectural Design: SOM with ICME & Tilke (ITS)

Khalifa Medical City is located in the heart of Abu Dhabi city, is a 838 -bed complex has a medical center. It is composed of Skidmore, Owings & Merrill LLP (SOM) and ICME and Tilke, SKMC joint design of three Grade Women's, Children's Hospital.

Monday, November 4, 2013

Environmental philosophy offers new opportunities building material industry

In recent years, with the rapid development of Internet technology, the Internet also for the industry to provide a new mode of information exchange, network information has become a key area of concern in various industries, along with the growing popularity of our network, various sectors of the information release platform showing a trend of rapid growth ladder in this development trend, 3G mobile Internet for the building materials industry to provide maximum information exchange platform. Recently, with the " green building " 3G mobile Internet development in line to rise again, furniture, building materials industry, environmental issues once again become the focus of attention.

Environmental problems in the construction industry are not a new topic, as early as the 1990s, many countries for sustainable development choices. In this context, the concept of green building has been widely accepted. With environmentally friendly products gradually become the protagonist in the market, consumers building materials made safe, healthy, low-carbon and other requirements. Promote the use of green technology, the use of pollution-free, non-polluting, non-radioactive environment-friendly building materials, the development trend of the construction industry. Here are more news and info on engineering materials.

As living standards improve, people more and more attention on the built environment. However, some traditional building materials made from chemical materials containing toxic substances. According to media reports, the U.S. Environmental Protection Agency's experts have for 10 new housing be sampled and tested. Test results showed that construction of indoor air with more than 500 kinds of chemical substances, many times higher than outdoors.

Over the years, we have always thought that China is a vast land of the country, that the Chinese people have a very rich natural resources. In fact, China's per capita natural resources are far below the world average. How to get more Chinese entrepreneurs and ordinary residents recognize the importance of energy conservation is worth everyone thinking.

Green building is the efficient use of resources of the building, namely energy-saving, environmental protection, comfortable and healthy buildings. Compared with the traditional building materials, green building materials can not only reduce energy consumption, but also rational use of industrial waste. New building materials not only does not pollute the indoor environment, but also beneficial to human health, help to improve the built environment can play a mold, noise, heat, sterilization, temperature control, humidity control, dimming, flame retardant, deodorant effect. New environmentally friendly building materials production process does not pollute the environment, does not generate new waste, and most can be recycled.

Sunday, November 3, 2013

U.S. study found that marital happiness can prolong the life of cancer patients

Harvard Medical School researchers from the National Cancer Institute within the scope of the database selected 10 common cancers with nearly 75 million patients, these cancers, including breast, lung, and prostate and colon cancer. The results showed that, before the spread of the disease, with spouses and families of married happiness decreased likelihood of dying from cancer patients by 20%, the protective effect of male cancer patients is more obvious. Moreover, for certain types of cancer (including breast and colon cancer), marriage to improve cancer survival role seems stronger than the effect of chemotherapy. This benefit exists in the top 10 cancers of various types of cancer patients.

The researchers analyzed these households were more likely to accept a happy family recommended healthy, which can get in early cancer diagnosis. After being diagnosed they are also more likely to follow a spouse under strict supervision and treatment programs and regular follow. The results show that the social support is for cancer patients positive effect. Of course, this should not be too frustrated unmarried, the support of friends is equally important. Read more news on health.

Currently more than 80 % of cancer patients found that it is already advanced missed the best treatment time. United States accounted for 70% of early cancer, so people should pay more attention to early cancer screening. Cancer Hospital will be the future of early diagnosis and treatment of cancer and precancerous lesions as the main task will greatly enhance the cure rate of the tumor. Early cancer screening and physical examination is not the same, for most medical institutions are provided in the physical examination of tumor markers detected, but only 30% of cancer patients will be elevated markers, such screening for about cancer patients invalid.