Reflection lights are used for different purposes

Reflection lights are often used in event technology, where the lights can be used for different purposes. There are the headlamps in different sizes and shapes. The reflection light is particularly popular because it is extremely easy to build and inexpensive. The reflection lights are mostly used in a group of 4 or 6 pieces at a so-called "bar" which are hanging position. The name comes from the so-called PAabolischen reflector, which is present in such headlights.

The spotlight is in the form as "shortnose" - or "longnose" variant. In addition, the headlights in different sizes are available. The standardized housing is noted in eighths of an inch. The following sizes are available:

Reflection light 16, 20, 30, 36, 38, 56, 64 Of especially the PAR 36, 56 and 64 are often represented. The PAR 36 is the principal point source and the PAR 56 shortnose, and the PAR 64 longnose are mostly used for the illumination of a Flächte.

Furthermore, there is in the different variants and different services that can accomplish the lamps. Also headlights with different beam angles are available.

A reflection light consists of an aluminum tube with one-sided cover, in which the lamp can be used. The lamp is a very large glass body containing a pabolischen reflector. In addition, such headlights on the front often have a holder which can be used for color screens and door curtains. At the rear end of the cap is below the lighting means, that is adjustable along the longitudinal axis, whereby an asymmetric aperture angle can be aligned.

The reflection light 64 version, for example, usually has so-called "sealed beam lamps ", this bring benefits between 500 W and 1000 W. There are also "Raylight reflectors ", by this favorable burner can be used on a PAR Scheiner. The only disadvantage is that the light is non-uniform and the charged color filter stronger. There is also a reflection light also landing light bulbs with a voltage of 28 V, they are connected in a series to groups of 8 bulbs. Through the groups are formed so-called "finger" effects. Usually there are these bulbs for reflection light 36 or PAR 64 version with an output of 250 W or 650 W.

Also LED slowly finds its place in PAR floodlights. These can be used above all in use purposes that do not require high light output. An important advantage of LED technology is above all the reduction of power consumption and thereby also reduced heat. Furthermore, LED reflection light can spotlight by a RGB color mixing to produce approximately 16.5 million colors, which is made possible by a DMX - 512 controls.

ATLD Service GmbH is a full -service partner, specializing in light, fair, Truss and audio. We advise and support our customers with technical planning and implementation in the areas of event technology and show technology.