The utility model is to provide reflection lights, especially a simple, low cost and infinite variety of flashing visual effects and reflective lighting structure.
Currently, the market has emerged reflector luminaires, the effects such as analog Star produced, as shown in Figure 1, the conventional cross-sectional view showing the light sky, the principle use of the mirror 91 and mirror 92 relative to the transmission, resulting in unlimited extension of the light produced by the effect, however, was the lack of diversity in itself change, although at the beginning of the consumer fresh, but it is easier because of its dull lighting effects and bored cause.
The main purpose of this utility model is to provide a reflection light structure, but to solve the existing reflection lights lack of diversity that exists in itself change, causing consumers, although in the beginning there was fresh, but it is easier because of the effect of light dull and boring the problem, to simple structure, low cost and infinite variety of flashing visual effects and practical progressive.
To achieve the above object, the present utility model relates to a Reflection Light Sensor 037U370044 structure, comprising: a housing, at least one light emitting module, the effect of the at least one control means, a first mirror and a second mirror unit for the transmission unit, a light emitting component layout in the housing, the light emitting diodes of these light-emitting component is electrically connected to the control means of these results, the more the light emitting component may be a cold cathode tube, wherein the laser light, or one lamp, wherein the control means effects the voice and flashing lights flashing Controller and the housing at one side of the light emitting module installed in the first planar mirror portion, the other side of the assembly housing the light emitting plane of the installation portion of the second mirror, wherein the second portion of the mirror coating or film, and the second mirror unit is cambered or irregular transmission surface, the mirror portion and the first surface or a combination of the irregular reflection surface, with the structure described above, by the principle of mirror reflection of the two, with various effect control device, so that the reflected light to produce an infinite repetition to achieve simple structure, low cost and infinite variety of visual effects and can cause flicker changes.
Using the first portion and the second mirror Ministry of mutual reflection of light, the user can be observed in the second portion of infinite mirror effect and the simple structure and low cost. Background pictures, advertising signs or indoor ceiling may have an unlimited extension of the deep sky effect and by flashing lights or adjust the sound controller, reaching diverse and widely used flickering effect.
Showing posts with label reflection light. Show all posts
Showing posts with label reflection light. Show all posts
Tuesday, February 11, 2014
Monday, February 10, 2014
Experts tell you assembly method of electric reflection light
The present invention relates to a method for assembling an electric reflection light comprising: a molded reflector having an optical axis and a hollow body having a neck-shaped portion, in the lateral wall of the neck portion is provided at least one opening; provide light, and the light source arranged in the reflector body; electrically connecting said light source and having contacts and having a conductive compliant material comprises a lamp cap, said conductor passing through said lateral wall opening.
In the known electric reflection light during assembly of the light source on the reflector relative to the mounting position in terms of the reflection characteristic of the reflector is preferred. Fixed through a lateral opening in the wall of the conductive body including crimped on the card in the lateral wall of the neck of the reflector brass casing. Then the lamp cap is connected to the conductive member or sleeve.
However, the defect of the assembled Reflection Light Sensor 037U375144, because the difference in thermal expansion between the glass and brass, the sleeve can not be well fixed.
The object of the present invention is to provide a method for assembling an electric reflection light in which the position of the light source is fixed, the difference in thermal expansion does not occur.
According to the invention, this object is at least one position along the longitudinal direction of the light source to achieve a fixed, wherein said outer conductor surrounding said at least part of the curved lateral walls.Since the compliance of the material, bending the conductor is feasible. For example, the conductive member comprises a flexible metal or other conductive material.
The electric reflection light may include a mounting member, preferably a metal mounting member for fixing the position of the light source parallel to the axis of the ground. In the preferred form, the mounting member is mounted around the sealing means of the lamp vessel. The mounting member may be mounted in the neck-shaped portion. Said mounting member includes an aperture, wherein the sealing means to accommodate the light source, e.g. lamp vessel. Said mounting member is substantially plate-shaped. Said mounting member is mounted in the neck-shaped portion.
In the conical inner wall of the neck provides a reference of the mounting member fit. The mounting member may be mounted on the tapered neck portion, the neck portion and can sink until the diameter of the mounting member is substantially equal to the diameter of the neck. Along the other direction is formed by bending the wire is fixed on the connection achieved.
In the known electric reflection light during assembly of the light source on the reflector relative to the mounting position in terms of the reflection characteristic of the reflector is preferred. Fixed through a lateral opening in the wall of the conductive body including crimped on the card in the lateral wall of the neck of the reflector brass casing. Then the lamp cap is connected to the conductive member or sleeve.
However, the defect of the assembled Reflection Light Sensor 037U375144, because the difference in thermal expansion between the glass and brass, the sleeve can not be well fixed.
The object of the present invention is to provide a method for assembling an electric reflection light in which the position of the light source is fixed, the difference in thermal expansion does not occur.
According to the invention, this object is at least one position along the longitudinal direction of the light source to achieve a fixed, wherein said outer conductor surrounding said at least part of the curved lateral walls.Since the compliance of the material, bending the conductor is feasible. For example, the conductive member comprises a flexible metal or other conductive material.
The electric reflection light may include a mounting member, preferably a metal mounting member for fixing the position of the light source parallel to the axis of the ground. In the preferred form, the mounting member is mounted around the sealing means of the lamp vessel. The mounting member may be mounted in the neck-shaped portion. Said mounting member includes an aperture, wherein the sealing means to accommodate the light source, e.g. lamp vessel. Said mounting member is substantially plate-shaped. Said mounting member is mounted in the neck-shaped portion.
In the conical inner wall of the neck provides a reference of the mounting member fit. The mounting member may be mounted on the tapered neck portion, the neck portion and can sink until the diameter of the mounting member is substantially equal to the diameter of the neck. Along the other direction is formed by bending the wire is fixed on the connection achieved.
Tuesday, January 21, 2014
What should you know before choosing a reflection light?
Incandescent light is also used and emit LED lamps, if by the light emitting diode electric current flows.
When the brightness of the light source is deflected, for example, through a mirror, then one speaks of a reflection light. For reflection lights also usually a part of the glass is coated so that the light beam can radiate in only one direction, so is much directed.
Reflection lights are also used in the private sector such as for commercial purposes.
Private Reflection Light Sensor is often used to selectively illuminate specific areas. Thus rooms can be warm lighting in combination with the lighting. With reflection lights islands of light or lighting effects can be created.
In the commercial sector reflection lights are used for example in agriculture to raise chicks. For this purpose it is, however, special reflection lights.
Other applications include greenhouses in horticulture, where the reflection lights are used for illuminating of certain plants.
Reflection lights are therefore no specific lamp type. There are reflection lights with different lamp bases and with different designs.
Are halogen systems used with reflection lights, lighting fixtures systems can be converted to LED lamps. The new LED lamps are available with standard lamp bases that are used for halogen systems. In this way, only the outdated halogen bulbs must be replaced with the LED reflection lights.
There are LED reflection lights with different lamp bases such as E27 LED reflection lights, E14, GU4, GU5.3, GU10, as well as MR16 and 12 Volt reflection lights.
When the brightness of the light source is deflected, for example, through a mirror, then one speaks of a reflection light. For reflection lights also usually a part of the glass is coated so that the light beam can radiate in only one direction, so is much directed.
Reflection lights are also used in the private sector such as for commercial purposes.
Private Reflection Light Sensor is often used to selectively illuminate specific areas. Thus rooms can be warm lighting in combination with the lighting. With reflection lights islands of light or lighting effects can be created.
In the commercial sector reflection lights are used for example in agriculture to raise chicks. For this purpose it is, however, special reflection lights.
Other applications include greenhouses in horticulture, where the reflection lights are used for illuminating of certain plants.
Reflection lights are therefore no specific lamp type. There are reflection lights with different lamp bases and with different designs.
Are halogen systems used with reflection lights, lighting fixtures systems can be converted to LED lamps. The new LED lamps are available with standard lamp bases that are used for halogen systems. In this way, only the outdated halogen bulbs must be replaced with the LED reflection lights.
There are LED reflection lights with different lamp bases such as E27 LED reflection lights, E14, GU4, GU5.3, GU10, as well as MR16 and 12 Volt reflection lights.
Thursday, January 16, 2014
Reflection lights are used for different purposes
Reflection lights are often used in event technology, where the lights can be used for different purposes. There are the headlamps in different sizes and shapes. The reflection light is particularly popular because it is extremely easy to build and inexpensive. The reflection lights are mostly used in a group of 4 or 6 pieces at a so-called "bar" which are hanging position. The name comes from the so-called PAabolischen reflector, which is present in such headlights.
The spotlight is in the form as "shortnose" - or "longnose" variant. In addition, the headlights in different sizes are available. The standardized housing is noted in eighths of an inch. The following sizes are available:
Reflection light 16, 20, 30, 36, 38, 56, 64 Of especially the PAR 36, 56 and 64 are often represented. The PAR 36 is the principal point source and the PAR 56 shortnose, and the PAR 64 longnose are mostly used for the illumination of a Flächte.
Furthermore, there is in the different variants and different services that can accomplish the lamps. Also headlights with different beam angles are available.
A reflection light consists of an aluminum tube with one-sided cover, in which the lamp can be used. The lamp is a very large glass body containing a pabolischen reflector. In addition, such headlights on the front often have a holder which can be used for color screens and door curtains. At the rear end of the cap is below the lighting means, that is adjustable along the longitudinal axis, whereby an asymmetric aperture angle can be aligned.
The reflection light 64 version, for example, usually has so-called "sealed beam lamps ", this bring benefits between 500 W and 1000 W. There are also "Raylight reflectors ", by this favorable burner can be used on a PAR Scheiner. The only disadvantage is that the light is non-uniform and the charged color filter stronger. There is also a reflection light also landing light bulbs with a voltage of 28 V, they are connected in a series to groups of 8 bulbs. Through the groups are formed so-called "finger" effects. Usually there are these bulbs for reflection light 36 or PAR 64 version with an output of 250 W or 650 W.
Also LED slowly finds its place in PAR floodlights. These can be used above all in use purposes that do not require high light output. An important advantage of LED technology is above all the reduction of power consumption and thereby also reduced heat. Furthermore, LED reflection light can spotlight by a RGB color mixing to produce approximately 16.5 million colors, which is made possible by a DMX - 512 controls.
ATLD Service GmbH is a full -service partner, specializing in light, fair, Truss and audio. We advise and support our customers with technical planning and implementation in the areas of event technology and show technology.
The spotlight is in the form as "shortnose" - or "longnose" variant. In addition, the headlights in different sizes are available. The standardized housing is noted in eighths of an inch. The following sizes are available:
Reflection light 16, 20, 30, 36, 38, 56, 64 Of especially the PAR 36, 56 and 64 are often represented. The PAR 36 is the principal point source and the PAR 56 shortnose, and the PAR 64 longnose are mostly used for the illumination of a Flächte.
Furthermore, there is in the different variants and different services that can accomplish the lamps. Also headlights with different beam angles are available.
A reflection light consists of an aluminum tube with one-sided cover, in which the lamp can be used. The lamp is a very large glass body containing a pabolischen reflector. In addition, such headlights on the front often have a holder which can be used for color screens and door curtains. At the rear end of the cap is below the lighting means, that is adjustable along the longitudinal axis, whereby an asymmetric aperture angle can be aligned.
The reflection light 64 version, for example, usually has so-called "sealed beam lamps ", this bring benefits between 500 W and 1000 W. There are also "Raylight reflectors ", by this favorable burner can be used on a PAR Scheiner. The only disadvantage is that the light is non-uniform and the charged color filter stronger. There is also a reflection light also landing light bulbs with a voltage of 28 V, they are connected in a series to groups of 8 bulbs. Through the groups are formed so-called "finger" effects. Usually there are these bulbs for reflection light 36 or PAR 64 version with an output of 250 W or 650 W.
Also LED slowly finds its place in PAR floodlights. These can be used above all in use purposes that do not require high light output. An important advantage of LED technology is above all the reduction of power consumption and thereby also reduced heat. Furthermore, LED reflection light can spotlight by a RGB color mixing to produce approximately 16.5 million colors, which is made possible by a DMX - 512 controls.
ATLD Service GmbH is a full -service partner, specializing in light, fair, Truss and audio. We advise and support our customers with technical planning and implementation in the areas of event technology and show technology.
Subscribe to:
Posts (Atom)